industry news
You location: HOME > news > industry news >

Cutting with or without water

Many blades are designed to operate either wet or dry. However, diamond tools and blades work better when wet, and dry cutting should be limited to situations in which water cannot or should not be used. Water will prevent the blade from overheating, greatly reduce the amount of harmful dust created by cutting, remove the slurry from the cut, and extend the life of the blade, since diamond is unable to withstand the forces involved at the elevated temperatures involved in dry cutting ceramic and abrasive materials, and will be subject to rapid tool wear and possible failure.

When water cannot be used (in, for example, electrical saws), measures should be taken to ensure that the operator does not inhale the dust created by the process, which can cause silicosis, a serious lung disease. When dry cutting, the blade should be allowed to cool off periodically. Cooling can be increased by allowing the blade to spin freely out of the cut. The OSHA has strict regulations regarding silica dust and requires a N95 NIOSH-approved respirator in work sites where dangerous amounts of silica dust are present.
 
Shijiazhuang Chengsheng Diamond Tools Co,.Ltd.was established in 1998,We are focus on development and producing the diamond and T.C.T saw blade. We can supply the Concrete Core Bits,the Stone Core Bits,the Core Bits Segment,the Stone Diamond saw Blade,the Tile Diamond Saw Blade,the Slotting Wall Blade,T.C.T saw blade,the Metal Cutting Blade,Wood Cutting Blade,the Nonferrous Metal Cutting Blade ,the Asphalt & Masonry Saw Blade,the Diamond grinding cup wheel for you.
 
Most of our saw blades are wet cutting saw blade.Some of blades need dry cutting.The cutting condition need operator flowing the product instruction book.Dry cutting or wet cutting not the problem anymore.

Copyright Shijiazhuang Chang sheng tools Co,.Ltd. All rights reserved.